Skip to content

System type

Split System Air Conditioning Kilburn

Split system air conditioning in Kilburn suits this suburb better than almost any other, because most homes here are single-storey brick cottages and post-war semis on compact blocks. Kilburn Air Conditioning installs, repairs and cleans them every week.

Call (08) 8246 6282 Get a fixed quote
Technician fitting the wall bracket for a split system indoor unit
Technician servicing the inside of an outdoor air conditioning unit

Welcome

The Local Team for Reverse Cycle Aircon in Kilburn

We are family-owned, ten years operating, and we hold a full ARC refrigeration and air conditioning licence, so every install is done properly from day one. You get the price fixed before work starts, and the job carries our Lifetime Labour Warranty.

Call (08) 8246 6282
Technician with a wrench, smiling mid-job

In detail

What a Split System Actually Is

A split system is two units working as one: a head mounted high on your wall inside, and a compressor outside, joined by pipework and cabling through the wall. There is no ductwork, so nothing lives in your roof.

Reverse cycle means both seasons.

The same unit cools in summer and heats in winter, which matters in Adelaide, where July is a genuine second season of use.

One outdoor unit, one or more heads.

A single split covers one living zone, while a multi-split runs two or three rooms off the one compressor.
Technician on a ladder with a drill during an air conditioning installation

In detail

Who a Split System Suits Here

The housing stock decides this, and Kilburn's stock is mostly small. Detached brick cottages and semi-detached Housing Trust-era double units dominate, with compact blocks and medium density.

Cottages and semis.

Homes along Galway Street and Moorang Street typically need one head in the living area and maybe a second for a bedroom, which is exactly what splits do well.

Compact blocks.

With houses sitting close to boundary fences, an outdoor unit has to be placed for airflow and noise, and we plan that on site.

Newer infill townhouses.

The renewal-era builds going up across the inner north usually suit splits too, because there is rarely roof space for ducts.

When it's the wrong answer.

If you want the whole house cooled at once and the roof cavity allows it, ducted air conditioning is the better conversation.

Running costs

Running Cost Through Adelaide's Seasons

Adelaide's summer is dry heat with consecutive days over 40, and winter is cold enough that heating is a real purchase, not a footnote. A reverse-cycle split earns its keep across both.

Star ratings matter.

A higher-star reverse-cycle unit costs less to run for the same output, and the gap compounds over a ten-year life.

Sizing matters more.

An undersized unit runs flat out and never catches up, while an oversized one cycles on and off wastefully. We measure the room, not guess it.

Zoning by room.

Splits cool the room you are in, so you are not paying to cool empty bedrooms, which is the cheapest running strategy in a two-person household.

Clean filters, cheap running.

A choked filter makes the unit work harder for less air, so book a clean every twelve to eighteen months.

How it works

How a Split System Install Runs

Every install is quoted at a fixed price on site, and the process is straightforward:

  1. 01

    Onsite assessment

    We measure the rooms, check the wall construction and look at where the outdoor unit will sit.

  2. 02

    Fixed price quote

    You get the full figure in writing before anything starts, with no hourly rates behind it.

  3. 03

    Wall and pipework

    We drill through the brick or render, run the pipework and cabling, and mount the indoor head.

  4. 04

    Outdoor unit set

    The compressor goes on brackets or a slab, placed for airflow, drainage and neighbour noise.

  5. 05

    Commission and test

    We pressure test, vacuum the lines, release the refrigerant and run the system through a full cycle before we go.

One note on older homes: larger splits need a dedicated power circuit, and some of the older cottages here have switchboards that need attention first. We flag that at quote stage, not on install day.

Common problems

Common Split System Problems We Fix

Splits are reliable, but they still fault. Our repairs team handles them across the 5084 postcode every week.

Not cooling.

Usually low refrigerant, a blocked filter or a coil fault. See our page on an air conditioner not cooling.

Leaking water.

A blocked condensate drain lets the indoor unit drip down the wall. It is a common fix, covered on our leaking water page.

Warm air in summer.

A reversing valve or refrigerant issue, both diagnosed on site. Our blowing warm air page explains the usual causes.

Noise and smells.

Rattles usually mean a loose fan or mounting, and a musty smell points to mould on the coil or filter. See air conditioner smell.

Why locals call us

Why Choose Us for Your Aircon Install

Fixed Upfront Pricing.

Fixed quote before any work starts. No hourly rates, no bill shock.

Licensed refrigerant work.

All work is carried out under a full ARC refrigeration and air conditioning licence, licence L162586, RAC01.

Lifetime Labour Warranty.

If a fault occurs due to workmanship, the team returns and fixes it at no cost.

Local, every week.

We work Kilburn and the inner north constantly, so we know these homes and their quirks before we arrive.

Brands

Brands We Install

We install and service Daikin, Mitsubishi Electric, Fujitsu and ActronAir split systems, and we will talk you through the right fit rather than the biggest ticket. Manufacturer warranties sit on top of our own.

If you are weighing a new unit against repairing the old one, our replacement page walks through when each makes sense.

Call (08) 8246 6282

Good to know

Frequently Asked Questions

How much does a split system cost to run through a Kilburn summer?

A correctly sized higher-star unit costs less to run than an oversized or undersized one, and reverse-cycle models cover winter heating too, so ask us to size it before you buy.

Can you put a split system in a solid-brick cottage?

Yes. We drill through brick routinely on the older homes around Galway Street and Moorang Street, and the pipework is run neatly inside or hidden along the wall.

Do I need one head or two?

It depends on room size, ceiling height and how the brick holds heat, which is why we measure the home on site rather than quote over the phone.

Will a split system heat the house in winter?

A reverse-cycle split heats as well as it cools, and Adelaide winters are cold enough that most households here use the heating side for months of the year.

How long does a split system installation take?

A single split system is usually installed in one day, with the outdoor unit mounted, pipework run and the system tested and commissioned before we leave.

We're available now — 24/7

Get Your Split System Priced This Week

Ring (08) 8246 6282 or send a message and we will book an onsite assessment. New customers get $50 off first service, and there is a 10% pensioner discount.

Humm interest-free finance is available for larger jobs. We are available 24/7 for emergencies, urgent issues get Within-the-Hour Response where availability allows, and the price is fixed before we start.

  • Fixed Upfront Pricing
  • Lifetime Labour Warranty
  • Fully licensed and insured
  • 24/7 emergency service
Call (08) 8246 6282

$50 off first service for new customers.

Fixed quote request

Tell us what the system is doing

We ring back to confirm a time. Or call (08) 8246 6282 now.

Book Now Call now